Cat Decat Downpipe

Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18

Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18
Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18
Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18
Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18
Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18
Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18

Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18

BRAND NEW COBRA SPORT DECAT DOWNPIPE. Manufacturers of Performance and Sports Stainless Steel Exhausts in Sheffield UK. All Cobra stainless steel exhaust systems are manufactured here in the UK. All Cobra Sport performance exhausts are manufactured from certified grade 304 stainless steel and TIG welded for a superior quality finish. Mercedes - AMG A 45 De-Cat Downpipe Performance Exhaust.

3.5"/88.9mm - 3"/76.19mm - Fits To OE. Stage 2 ECU Remap Required. Takes Upto 6 hours To Fit. Power testing with the Cobra Sport downpipe fitted revealed a +5bhp increase in power over standard, the downpipe has however been designed for fitment in conjunction with an engine remap.

Max power increased by a +60bhp to 425bhp. Torque increased by a colossal +137 lb-ft up to a staggering 504 lb-ft at 3160rpm, the power increases create a dramatic change in driver experience after the remap was applied.

Both Cobra Sports Technical and R&D teams were involved in the planning and preparation that went into designing the new downpipe. Cobra Sport have been able to reduce the weight of the part by 54% with the downpipe weighing in at just 3.45kg. Manufactured from aircraft grade 304 Stainless Steel, advanced manufacturing techniques and superior TIG welding procedures produce a superlative finish.

Matt Thomas, Sales Manager at Cobra Sport says The upgraded sporty tone created by the Cobra Sport downpipe matched with an ultra aggressive gear change sound put the already impressive AMG A 45 on a whole new level. The incredible power increases obtained from the stage 2 re-map speak for themselves, all made possible by the exhaust technology into the Cobra Sport downpipe. Brand New Cobra Sport Stainless Steel.

3.5"- 3" Decat Downpipe - Removes Cat. Some exhausts are made to order. 3.5"/88.9mm - 3"/76.19mm.

As a company Cobra are committed to continuous improvement and investing in new developments, with a keen focus on quality and service our loyal highly trained team are always happy to help. The production facilities at Cobra Sport exhausts enables us to produce exhausts in high volume and having worked with clients such as Subaru UK, Isuzu UK and Ginetta Cars to name but a few.

How are your exhausts made? All of Cobra exhausts are made from aircraft grade 304 stainless steel and constructed using precision TIG welding with mandrel formed bends in the pipe work for a smoother gas flow.

Cobra pride ourselves in producing high quality products. What sound can I expect from your exhausts? Cobra exhausts will have a more sporty tone than original equipment exhausts. This is an inevitable result of the less restrictive systems they produce.

However, with careful design and production methods, Cobra aim to keep a subtle sporty tone. If you prefer a loud system, then one of our non-resonated (no centre box) exhaust systems will provide a louder exhaust note. Many of Cobra products feature a movie of the exhaust and give some idea as to the sound which you can expect. What power gains can I expect to achieve? Of course this varies from engine to engine, our systems are designed and manufactured to maximize gas flow with increased diameter pipe work, free flowing silencers and mandrel bends which provide a much less restrictive exhaust system than original equipment exhausts, resulting in a much better engine response and increased BHP.

Typically you can expect to achieve around a 10% increase from the installation of a cat-back system. Some individual products also show approximate power gains. Is it legal to put a de-cat pipe on my car? You can only de-cat your car if it was registered prior to 1992, otherwise it will fail the emissions check at your MOT station. Will my car need remapping?

If you are fitting a cat back system to your car, this will have no effect on the engine management operations. However, if you are replacing your original system with a de-cat, sports cat or front pipe your car may need remapping as it may cause the vehicles engine management light to activate.

What is the difference between resonated and non-resonated systems? Resonators are box chambers incorporated into the exhaust system, which are used to make the exhaust quieter, by cancelling certain sound frequencies.

A non-resonated exhaust system will therefore, give a louder exhaust note and a resonated exhaust system, a quieter exhaust note. Either option will still provide extra performance. What is a Slash-Cut tailpipe?

Slash-cut tailpipes are finished and cut off at a 15 degree angle, and suit certain types of vehicles depending upon the shape of the bumper and overall aesthetics of the vehicle. How do I keep my exhaust looking like new? If you do not clean your exhaust/tailpipe, it will eventually become discoloured and be more difficult to bring back to its original finish. Regular cleaning with a non-abrasive metal polish such as Solvol Autosol® will ensure that your exhaust continues to look as new. At Roadrunner we pride ourselves on our personal service that cannot be compared.

To any of our competitors. Our highly competent sales team are always more than willing to help, whether youre unsure of fitting specifications or just making an enquiry. All exhausts can be tracked to give you complete peace of mind. INCLUDES UK MAINLAND & SCOTLAND. AB10, AB31-AB39, AB40 - AB42, AB43-AB45, AB51-AB56.

FK19-FK21, HS1-HS9, IV1-IV28, IV30-IV32, IV36, IV40-IV49, IV51-IV56, IV36. KA27, KA28, KW1-KW4, KW5-KW17, PA20-PA38, PA40-PA49. PA60-PA78, PA87 - PA88, PH1, PH5-PH9, PH10, PH15-PH26, PH30-PH44, PH49-PH50, ZE1-ZE3. We will also send to.

Northern Ireland, Southern Ireland, Highlands, Orkney, Shetland, Isle of Wight, Isle of Man. The item "Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18" is in sale since Friday, October 6, 2017. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts". The seller is "roadrunnermotorsport" and is located in Nottingham. This item can be shipped worldwide.
  • Part Manufacturer Number: ME18
  • Make: Mercedes
  • Model/ Series: Mercedes A45 AMG 2.0-litre turbo 4MATIC
  • Subtype: Stainless AMG A 45 De-Cat Downpipe Frontpipe
  • Intended Use: Modification/ Enhancement
  • Country/Region of Manufacture: United Kingdom
  • IMPORTANT NOTE: Stage 2 ECU Remap Required
  • ENGINE SIZE: 2.0-litre turbo 4MATIC
  • IMPORTANT NOTE 2: Removes OE Catalyst
  • PIPE DIAMETER OD: 3.5"/88.9mm - 3"/76.19mm
  • IMPORTANT NOTE 3: Fits To OE Original Equipment Exhaust
  • IMPORTANT NOTE 4: Takes Upto 6 hours To Fit
  • EC / TUV APPROVED: NO - (No Papers Supplied)
  • Manufacturer Part Number: ME18
  • Brand: Cobra Sport
  • Type: Cobra Stainless Performance Decat Exhaust
  • Part Manufacturer: Cobra Sport

Cobra Exhaust Mercedes A45 AMG Decat Downpipe Removes Catalyst Fits To OE ME18